To get Arduino code from GitHub: https://github.com/ForceTronics/SmartThermoStat
To access MIT App Inventor 2 go to: http://ai2.appinventor.mit.edu\
Saturday, October 18, 2014
Building a Smart Thermostat Part 3
Welcome to the third and final part of the Smart Thermostat project! In part three we build the Android App to monitor and control the thermostat remotely via Bluetooth. To build the Android App we will use MIT App Inventor 2. If you would like a copy of the Android App code just email me at forcetronics@gmail.com
To get Arduino code from GitHub: https://github.com/ForceTronics/SmartThermoStat
To access MIT App Inventor 2 go to: http://ai2.appinventor.mit.edu\
To get Arduino code from GitHub: https://github.com/ForceTronics/SmartThermoStat
To access MIT App Inventor 2 go to: http://ai2.appinventor.mit.edu\
Subscribe to:
Post Comments (Atom)
In video two you said that video three would contain instructions on powering the thermostat from the 24VAC, but this video is just about the app. Do you have that information somewhere else? I've been following along on this project, and am now stuck at that part.
ReplyDelete